X
  • Geen producten in de lijst
X
  • Geen producten in de lijst

Constant Thickness Film Maker

Constant Thickness Film Maker

The Constant Thickness Film Maker and High Temperature Constant Thickness Film Maker enable the analyst to produce thin samples of plastics and polymers for laboratory analysis, commonly by FTIR. This potentially enable the accurate and quick identification of additives, contaminants and polymer mixtures.
  • Kits or component parts available depending on maximum temperature required, 300 or 400oC
  • Reproducible constant film thickness
  • Quickly and easily change the film thickness with a choice of 15, 25, 50, 100, 250 and 500 µm
  • Suitable for qualitative and quantitative analysis

Product configurator

Product nr. Constant Thickness Film Maker

It's time for an upgrade!

Get a 10% discount on Specac Hydraulic Presses and recieve
up to €450 credit for your next purchase. 

Gain €100 extra credit when swapping an old Hydraulic Press

Direct leverbaar

Meer informatie over Constant Thickness Film Maker

While ATR is an ideal method of analysis by FTIR of base polymers, often in pellet form for quick quality control or raw materials testing, if it is required to determine the presence of additives or contaminants in low concentrations, transmission analysis using a thin film sample with a longer pathlength than is possible with ATR is the best method. The Constant Thickness Film Maker and High Temperature Constant Thickness Film Maker tools enable the hot pressing of polymers to form a thin film sample and is one of the most commonly used techniques for the analysis of polymers by FTIR. Ideally suited for use with the Specac 15-ton manual press, there are 2 options based on the maximum temperatures of either 300 oC or 400 oC.   Constant Thickness and High Temperature Constant Thickness Film Maker Comparison

     Constant Thickness Film Maker    High Temperature Constant Thickness Film Maker  
  Maximum Temperature  300oC  400oC
  Maximum Load  4 Ton  2 Ton
  Sample Diameter  29mm  29mm
  Sample Thickness  0.015, 0.025, 0.050, 0.100, 0.250, 0.500mm   Up to 3mm with special manufacture  0.015, 0.025, 0.050, 0.100, 0.250, 0.500mm
  Approx. Cycle Time  20-30 minutes  30-40 minutes
  Required  ·       CTFM Accessory ·       Specac Heated Platens: GS15515 ·       Compatible Specac Benchtop Mounted Press  ·       HT-CTFM Accessory ·       Compatible Specac Benchtop Mounted Press
  Compatible Presses  ·       15* or 25-Ton Manual Press ·       8, 15 or 25-Ton Power or AutoTouch Press   * Best Suited for Film Making  ·       15-Ton* Manual Press ·       8 or 15-Ton Power or AutoTouch Press   * Best Suited for Film Making
  Power Supply Requirement  110v or 230v – please specify  110v or 230v – please specify
  Cooling Water Requirement  Approx. 1 litre per minute flow  Approx. 1 litre per minute flow


Andere experts gebruiken onderstaande producten ook

Ontbreekt er een onderdeel waar je naar opzoek bent? Laat ons weten klik hier

Film Maker Kit: Constant Thickness Film Maker + Heated Platens

Film Maker Kit: Constant Thickness Film Maker + Heated Platens + 15 T Manual Hydraulic Press

Film Maker Kit: High Temperature Film Maker Kit + 15 Ton Press

High Temperature Film Maker+A196


Reserveonderdelen

Ontbreekt er een onderdeel waar je naar opzoek bent? Laat ons weten klik hier

 

Set Of Spacing Rings For High Temp Film Maker

Aluminium 40 mm Foil Discs (Pkt 200)

Cooling Block Chamber for Constant Thickness Film Maker

Filmmaker for Constant Thickness Film Maker

PTFE Sheets 0.25 mm Thick (Pkt 10) for Heated Platens+A203

Set Of Spacing Rings For Constant Thickness Film Maker


Andere experts bekeken ook

Andere suggesties…

Hulp nodig?

Onze product specialisten helpen je graag

Start een chat via de oranje tekstwolk rechtsonder, of stel je vraag hieronder. Eén van onze experts beantwoordt je vraag altijd binnen 24 uur.

Bereikbaar op werkdagen tussen 09:00 – 17:00